Huayang Co., Ltd.
+86(0)13926850059

What are the factors that cause poor silicone products

2022/07/30   |   Read: 5342

Now, the application technology of silicone has been continuously infiltrated into all walks of life, and the application and requirements of different industries for silicone products are also reflected in different aspects. For example, manufacturing from kitchen silicone supplies, mobile phone shell silicone supplies, baking silicone supplies will be used.


At the same time, in the process of producing silicone products, there are often many adverse factors affecting the production capacity, thus affecting the delivery time of delivery, leading to the loss of the factory. Since it is affected by many bad factors, we will find the reasons, improve the bad, and reduce the loss of the factory. Today, Huayang Industry will introduce the bad causes and improvement methods in production:


First, the selection of materials, the most important point in the production of silicone products is the selection of materials, the material is not selected, it will lead to the quality of the product in the subsequent production process, resulting in a series of problems such as customer refund, complaints and so on. So make sure you choose your materials well.


Second, the thickness of the produced silicone products is uneven, such as too thick, can be properly reduced mold temperature, prolong the vulcanization time.


Third, if there is a bulge, it is caused by unripening, and the vulcanization time can be appropriately increased.


Fourth, opening, opening is generally the problem of silica gel raw materials, this time to check whether there is a problem with the original village material.


Fifth, the surface of silicone products is easy to spray frost, so it is necessary to master the upper limit of several compounding agents that are easy to spray frost.


Six, the surface of silica gel products have microholes, mainly because the raw material is too much water, the raw material should be baked and then used.


Seven, silica gel products produce trapped gas, mainly related to the mold, so the mold design to consider the exhaust problem.


There are bubbles on the surface of silicone products, which can improve the temperature of the mold, the time of fluidization and the number of exhaust.


Nine, silicone products are not ripe, but also improved under the temperature and fluidization system.


We do not find reasons for customer complaints, nor do we explain them because of quality. In the production process, there are many adverse factors affecting silicone products, as long as we from raw materials to quality testing, can be layers of control, in strict accordance with the requirements of production, you can produce customers satisfied with silicone products.


For inquiries or quotations about silicone rubber products, please contact us below.

We also accept inquiries by phone

TEL: +86(0)13926850059 * Mon - Fri 8:00 - 17:00

Mail: zwei@hwako.hk

侵 权 告 知 函

尊敬的用户您好,贵公司网站(silicone-hy.com)正在使用本公司拥有合法著作权的软件云优城市分站管理系统(简称“云优CMS”(中国国家版权局计算机软件著作权登记号:2018SR118857),但本公司的正版用户数据库中并未有贵公司的购买记录。

本公司《使用协议》已载明,企业用户(泛指非自然人的团体,如企业、协会等组织机构)必须购买软件授权后方可正式建站使用,在未获得商业授权之前,企业用户不得将本软件用于正式建站。根据上述内容,贵公司作为企业用户,如使用本公司开发的云优城市分站管理系统,则应通过购买方式获得本公司商业授权后方可使用。但截至本通知发出之日,贵公司尚未向本公司购买云优城市分站管理系统。故,贵公司的上述非法使用行为已严重侵犯本公司的计算机软件著作权,并给本公司造成了严重的经济损失。