Huayang Co., Ltd.
+86(0)13926850059

Reasons for the size increase or deviation of silicone products

2022/07/30   |   Read: 6726

The size of silicone products need to be done in accordance with the design requirements, but silicone products are generally not as strict as other products with very tight requirements, such as many metal products require the size to μ. Silicone products are not so strict, only need to meet the requirements of the design, because of the nature of silicone material, the size of silicone products can not be too accurate, but sometimes the size of silicone products becomes larger or the size of silicone deviates. How does this happen, and how should manufacturers of silicone products avoid it?




Reasons for the size of silicone products to increase:


1, silicone products in the production of producing countries molding temperature is too high will accelerate the vulcanization of silicone products, resulting in silicone products in the molding mold fluidity decline, will lead to silicone product size deviation, molding temperature is too low, will lead to silicone products after the size of the larger.


2, when the molding pressure is too high, it will lead to the size of the silicone product.


3, too much silica gel feed, will cause silica gel product bag wind, silica gel product load is high, resulting in silica gel product size is too large.


4, sometimes it may be the design of the mold itself, the mold design is not rigorous, unqualified, then in the production no matter how to adjust the size will be found there are some errors.




Reasons for the deviation of silicone size:


In the same machine processing and for the machine parameters and temperature and pressure and so on have not changed, the mold time will affect the appearance of the product size change, so the product size deviation for the control of temperature time is very important, because the mold time is not controlled within a certain time range, the vulcanization temperature of silicone products will increase. There will naturally be deformation, so the control of time during processing can not only ensure the same size of the product, but also ensure the quality of the product, if the time is not controlled, for a long time, for a short time, it will lead to various adverse phenomena in the product.


Secondly, raw materials may lead to different sizes of products. In the production of long-term placed rubber materials, the feel of vulcanized products is different, and the viscosity of products is relatively large, the tension is stiff, and the size will naturally be different. This reason is caused by the failure of vulcanizing agent for too long of raw materials, resulting in decreased flow performance. So want to maintain the size and shape of the product, first from the source, for the silicone products manufacturers affect the product factors more reasons, in addition to the reasons of the machine and raw materials, the impact of the mold on the product is also one of the main reasons, different problems can be dealt with with different solutions.


For inquiries or quotations about silicone rubber products, please contact us below.

We also accept inquiries by phone

TEL: +86(0)13926850059 * Mon - Fri 8:00 - 17:00

Mail: zwei@hwako.hk

侵 权 告 知 函

尊敬的用户您好,贵公司网站(silicone-hy.com)正在使用本公司拥有合法著作权的软件云优城市分站管理系统(简称“云优CMS”(中国国家版权局计算机软件著作权登记号:2018SR118857),但本公司的正版用户数据库中并未有贵公司的购买记录。

本公司《使用协议》已载明,企业用户(泛指非自然人的团体,如企业、协会等组织机构)必须购买软件授权后方可正式建站使用,在未获得商业授权之前,企业用户不得将本软件用于正式建站。根据上述内容,贵公司作为企业用户,如使用本公司开发的云优城市分站管理系统,则应通过购买方式获得本公司商业授权后方可使用。但截至本通知发出之日,贵公司尚未向本公司购买云优城市分站管理系统。故,贵公司的上述非法使用行为已严重侵犯本公司的计算机软件著作权,并给本公司造成了严重的经济损失。